+39 0832 731655 | rives@rives.it

Auxiliaries

Cera Antica

2025-07-25T12:57:56+02:00

CERA ANTICA is a decorative paste wax created to enhance the shine of stucco. Quick and easy application with a stainless steel trowel in a single coat allows for excellent marble effects while respecting the workmanship and naturalness of the stucco to which it is applied.

Substrate preparation: Before applying CERA ANTICA, make sure that the substrate on which the decorative stucco has been applied is perfectly dry.

Application: Mix thoroughly before use. Apply CERA ANTICA with a stainless steel trowel, covering approximately ½ m2 at a time, until completely absorbed.

After 5 minutes At 20°C, remove excess with a soft cloth. After about 30 minutes at 20°C, polish the surface with a dry, non-abrasive cloth (non-woven fabric, microfiber, cotton, or linen).

Practical advice: The ambient temperature during the application cycle must range between 5°C and 35°C, and the relative humidity must not exceed 80%. During application, avoid direct contact with eyes and skin, use clean water for dilution, and store the undiluted product in the closed container in a cool, dry place. The colors in the chart are indicative and may therefore vary from batch to batch. Since we do not constantly monitor the application of the product, we are not responsible for the final result. Before decorating a wall, we recommend performing a small-scale test.

Are you interested in this product?

Write to us marketing@rives.it

Sbianca Muffa

2025-08-06T09:09:05+02:00

A WHITENING AND SANITIZING SOLUTION that effectively removes mold, algae, and moss from surfaces. WHITENING MOLD also provides a fragrant sanitizing effect on unsightly dark mold stains that form in particularly humid environments, such as kitchen corners and shower stalls.

Equipped with a convenient sprayer for easy use, BLIANCA MUFFA should be sprayed directly onto the surface from which you want to remove the stain.

Theoretical yield Dilution Application Drying Color Use for Sizes
8-10 m2/L per coat ready to use airless 2 hours to the touch;
24 hours in depth
colorless interiors L 0,250

Are you interested in this product?

Write to us marketing@rives.it

Blocca Muffa

2025-08-05T11:59:39+02:00

A sanitizing, mold-fighting solution for walls, featuring extremely high penetrating power and long-lasting effectiveness against mold, fungi, and algae. Its new, enhanced formula, compliant with current regulatory requirements, makes it suitable for use on any type of wall surface, both interior and exterior.

Theoretical yield Dilution Application Drying Color Use for Sizes

4-5 m²/L

ready to use

brush 4 hours to the touch;
24 hours in depth
colorless Interiors L 5 – L 1

Fondostuck

2025-08-04T13:47:45+02:00

Ready-to-use filler paste with good filling power. Suitable for smoothing wood surfaces, walls, and plasterboard.

Theoretical yield Dilution Application Drying Color Use for Sizes
8-10 m2/L per coat 100% by volume
with pure water
Brush 4 hours to the touch;
48 hours in depth
colorless exteriors L 0,500

Are you interested in this product?

Write to us marketing@rives.it

Go to Top