Professional solutions for mold removal at home

Defeat Mold Once and for All | Rives Professional Solutions.
Say goodbye to black stains and unpleasant odors: discover the definitive system for healthy, protected walls.

🛑 The problem: why does mold always come back?

Many people think a simple swipe of bleach is enough. The reality is that mold isn’t just dirt: it’s a living organism that releases toxic spores into the air you breathe. Spraying generic products bleaches the stain, but it doesn’t kill the deep roots (hyphae).

Risks to your home and your health:

  • Respiratory problems: Asthma, allergies, and chronic rhinitis. 
  • Structural damage: Flaking plaster and deterioration of finishes.
  • Property devaluation: A house with mold loses market value.

🛠 Guide: How to apply the anti-mold system

  • Sanitize: Apply Mold Blocker directly to the stains (do not scrub dry to avoid spreading spores).
  • Wait: Let it act for at least 24 hours for the penetrating power to take effect.
  • Whiten: Remove dead mold stains with our Mold Whitener.
  • Finish: Choose the most suitable Rives water-based paint (e.g., Ecosan Plus Thermic for cold walls or Tinta Bella) and apply two coats.

✅ The Rives Protocol: 3 steps to healthy walls

1. Deep cleaning and hygiene

Before painting, it is essential to neutralize any organic traces.

  • Blocca Muffa: Our specialized sanitizing solution. Thanks to its extremely high penetrating power, it penetrates the pores of the wall, eliminating mold, fungi, and algae at the root. Its enhanced formula guarantees long-lasting effectiveness on all surfaces, both indoors and outdoors.

2. For the most stubborn stains

Whitening and sanitizing mold-dissolving solution

 

  • Sbianca Muffa: The quick solution for those seeking immediate aesthetic results. This active chlorine-based spray cleaner instantly eliminates black mold stains, whitening the surface without scrubbing. Ideal for tile joints, shower stalls, and ceiling corners.

3. Choice of the final solution (anti-mold finishes)

After sanitizing, it’s necessary to apply a protective barrier. Rives offers a full range of specialized water-based paints to suit your room’s needs:

A. For environments subject to condensation and cold (thermal bridges)

 

  • Ecosan Plus Thermic: Thermal and sound-absorbing water-based paint. Thanks to its hollow glass microspheres, it creates a barrier effect that reduces heat exchange, eliminates surface condensation, and promotes energy savings.

Did you know? A wall treated with thermal paint can be up to 2-3°C warmer than a traditional paint, eliminating the “dew point” where mold grows.

B. For absolute hygiene and maximum breathability

 

  • Isolante M3000 is a colorless, eco-friendly acrylic primer designed for treating both interior and exterior surfaces. Thanks to its microemulsion-based formulation, it boasts high penetrating and binding power, ideal for consolidating surfaces before painting.

 

  • Ecosan Plus: A new-generation breathable paint with bactericidal and sterilizing properties. Ideal for bathrooms and kitchens, it provides an elegant satin finish.

  • Tinta Bella: Sanitary, opaque, water-based paint with high coverage and wash-resistant properties. Perfect for hospitals, basements, and homes where hygiene is a priority.

C. Siloxane and Acryl-Siloxane Solutions (water repellency and well-being)

 

  • Sil Paint: High-quality microporous siloxane water-based paint, specifically designed for historic centers and prestigious buildings thanks to its low dirt retention.

 

  • Biancosil: Breathable, mold-resistant water-based paint. Hypoallergenic, formaldehyde-free, and low-VOC, it’s ideal for those seeking indoor wellness.

 

  • Genyosil: Washable acrylic-siloxane version that combines excellent coverage with high vapour permeability, keeping surfaces dry and clean

D. For a bright, velvety white

 

  • Candore: A super-washable water-based paint with exceptional whiteness and masking power. Ideal for hiding wall imperfections with a velvety finish.

🔬 Rives at the service of your comfort

Why do our solutions work where others fail?

  • Certified microporosity: We allow water vapor to escape, preventing it from becoming trapped in the wall (the primary cause of mold).
  • Slow-release additives: The anti-mold active ingredients remain effective for years, not just a few months.
  • Low environmental impact: Family-safe products, certified for low emissions (VOC).

💡 FAQ: The secrets of the Rives anti-mold cycle

Absolutely not. This is the most common and dangerous mistake. Scraping dried mold releases millions of spores into the air you breathe and deposits them on other walls, creating new breeding grounds.

The trick: Always apply a restorative cleaner (like Blocca Muffa) directly to the stain first. Let it sit until the mold chemically “kills,” then remove the residue with a damp sponge.

Isolante M 3000 is a highly penetrating water-based acrylic sealer. It should be used after cleaning/whitewashing if the wall is flaking or absorbs water unevenly.

  • The Advantage: In addition to strengthening the wall, M 3000 seals microporosities, ensuring that the final anti-mold paint spreads evenly and doesn’t absorb too quickly into the substrate.
  • Technical Tip: If you’ve removed old paint or if the plaster is new, M 3000 is the ideal bonding agent to ensure the anti-mold coating doesn’t flake off over time.

If mold forms in corners or behind cabinets, the problem is temperature changes. In these cases, standard mold-resistant paint may not be enough.

  • Tip: Use the Rives Ecosan Plus Thermic anti-condensation/thermal line. This paint contains glass or ceramic microspheres that create a “barrier effect,” making the wall warmer to the touch and preventing water vapor from turning into water droplets (mold’s favorite food).

The temptation to apply just one generous coat is strong, but wrong.

  • The Rule: Two coats are the bare minimum. The first coat saturates the surface, the second creates a protective surface shield. Always allow sufficient drying time (at least 6-8 hours) between coats to allow the active ingredients to bind properly.

Since you’ve been working in a contaminated environment, cleanliness is vital.

  • Professional Secret: Wash your tools with hot water and a drop of sanitizer. If you used the roller on a heavily infested wall, consider disposing of it after the job to avoid carrying residual spores to other areas of the house in the future.

Need help? Call us!

If you need more information on how to solve your mold problem, call us. Our consultants will provide you with all the information you need about products, application cycles, and how to use them.

 

Chat on WhatsApp