NewsHome

Hygienic, anti-mold and anti-algae water-based paint with powerful moss-fighting properties, specifically formulated to prevent the formation of mold and bacteria. Particularly suitable for interior environments where absolute hygiene is essential, such as hospitals, cellars, private homes, etc., it also performs highly outdoors, as it is strengthened to withstand continuous washing without reducing its protective properties against mold. fungi, algae, lichens, and mosses. Its film, in addition to being particularly resistant to rubbing and washing, has a matte, opaque appearance that easily masks any imperfections in the wall.

A continuous, thick-layered, spatula-applied plastic siloxane coating, available in various grain sizes, waterproofs walls and offers excellent resistance to the corrosive action of salt water and ultraviolet rays.

FIBRIS-R is a plastic coating based on styrene-acrylic polymers in aqueous dispersion, marble chips, and particularly light-resistant color pigments. Applied with a stainless steel trowel, it waterproofs and perfectly resists the corrosive action of salt water and ultraviolet rays on walls.
These chemical characteristics, combined with its extraordinary visual effect, make FIBRIS-R particularly suitable for decorating, furnishing, and waterproofing both interior and exterior surfaces. FIBRIS-R is available in the following grain sizes: 1 mm, 1.2 mm, and 1.8 mm.

New walls: Make sure the substrate is at least a month old, then remove any impurities and apply a coat of our FISSATIVO R2000 with pure water. Then apply a coat of our Sottofondo pigmented primer in the same color as the FIBRIS-R you will be applying.

Old walls: remove any loose paint and apply a coat of our FISSATIVO R2000. For particularly flaky surfaces, we recommend using our PLIOPRIMER, an insulating and consolidating primer. Fill any large imperfections with our RASOSTUCCO. Next, apply a coat of our SOTTOFONDO, a pigmented primer in the same color as the FIBRIS-R you will be applying. Mix the product until it forms a homogeneous mass. Spread it on the surface with a stainless steel trowel and then work it with a plastic trowel to obtain a circular smoothed effect.

RASOPLAST is a thick cementitious skim coat with excellent adhesive and filling properties, excellent flowability, and ease of application. RASOPLAST is suitable for leveling and smoothing uneven surfaces such as scratched, grained, rolled, and textured surfaces, as well as other types of substrates such as tiles, bricks, natural stone, concrete, and both smooth and porous surfaces.

Application

Remove any dirt or loose paint from the substrate by mechanically removing any loose or flaking particles. Wash with water to remove any dusty residue that may prevent proper adhesion. Add 30% white or gray cement and mix until a smooth paste is obtained. Apply a first coat of RASOPLAST using a stainless steel trowel. After 12 hours, at 20°C or on a dry substrate, apply a second coat of RASOPLAST, working to smooth out any cracks or unevenness.

Sil Paint is a microporous siloxane water-based paint for interiors with extremely high breathability and water repellency. Sil Paint is particularly suitable for historic centers and buildings in general. It features low dirt retention, excellent vapor permeability, and effective protection against humidity, mold, and salts.

ECOSAN PLUS is a next-generation breathable, anti-mold, fungicidal, bactericidal, and sterilizing paint that is easy to apply to any smooth or textured surface. Formulated to eliminate and prevent unsightly mold stains and to prevent the growth of microorganisms that provide a breeding ground for fungi, moss, and algae, Ecosan Plus gives surfaces a pleasant satin finish and is particularly suitable for humid or poorly ventilated areas such as bathrooms, kitchens, and any other environment where fungal contamination is a common and undesirable problem for health and hygiene reasons.