FIBRIS-R is a plastic coating based on styrene-acrylic polymers in aqueous dispersion, marble chips, and particularly light-resistant color pigments. Applied with a stainless steel trowel, it waterproofs and perfectly resists the corrosive action of salt water and ultraviolet rays on walls.
These chemical characteristics, combined with its extraordinary visual effect, make FIBRIS-R particularly suitable for decorating, furnishing, and waterproofing both interior and exterior surfaces. FIBRIS-R is available in the following grain sizes: 1 mm, 1.2 mm, and 1.8 mm.
New walls: Make sure the substrate is at least a month old, then remove any impurities and apply a coat of our FISSATIVO R2000 with pure water. Then apply a coat of our Sottofondo pigmented primer in the same color as the FIBRIS-R you will be applying.
Old walls: remove any loose paint and apply a coat of our FISSATIVO R2000. For particularly flaky surfaces, we recommend using our PLIOPRIMER, an insulating and consolidating primer. Fill any large imperfections with our RASOSTUCCO. Next, apply a coat of our SOTTOFONDO, a pigmented primer in the same color as the FIBRIS-R you will be applying. Mix the product until it forms a homogeneous mass. Spread it on the surface with a stainless steel trowel and then work it with a plastic trowel to obtain a circular smoothed effect.
| Theoretical yield |
Dilution |
Application |
Drying |
Color |
Use |
Format |
1 mm = 2 – 2.2 kg/m2 per coat;
1.2 mm = 2.2 – 2.4 kg/m2 per coat;
1.8 mm = 2.5 – 2.7 kg/m2 per coat |
ready to use |
trowel |
3 hours to the touch;
24 hours in depth |
Tinting System
Color Fans
Exterior and Oxide |
exteriors |
Kg 25 – Kg 24
Kg 4 |
